Orders over $35 qualify for free shipping. Orders under $35 will incur a $5 shipping charge. Excludes Plows, Dump Inserts, Trailers & Salters.
|
snow plow replacement parts
salt spreader accessories
shorelander trailer parts
triton snowmobile trailer parts and accessories

Dexter 8-258-5UC1 Complete Painted Hub Assembly - 5 on 4.5 - L44649 Bearings - 6.5 Inch Hub Flange - Fits BTR 1-1/16 Inch Spindle

Brands:
Product Number: RED-8-258-5UC1
Vendor Number: 8-258-5UC1
$75.95 $64.99

Dexter 8-258-5UC1 Complete Painted Hub Assembly - 5 on 4.5 - L44649 Bearings - 6.5 Inch Hub Flange - Fits BTR 1-1/16 Inch Spindle

Product Number: RED-8-258-5UC1
Vendor Number: 8-258-5UC1
$75.95 $64.99 You Save $10.96 (14.4%)
Adding this item to your cart will qualify your order for US domestic

QTY:

Hub is designed for use on trailer idler axles. Fits 2,200-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. For 13" to 15" wheels. Fits BTR 1-1/16 Inch Spindle.

 

Product Features

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included
  • Sturdy iron construction
  • Hub and drum are made in the USA

 

Product Specifications

  • Application: 2,200-lb trailer axles with BTR spindles
  • Wheel size: 13" to 15"
  • Bolt pattern: 5 on 4-1/2"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 1,100 lbs per hub

 

Bearing, Race, & Seal Information

  • Bearings (included)
    • Inner bearing: L44649 (1.063" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal (included): 10-60
    • Inner diameter: 1.5"
    • Outer diameter: 1.987"

 

Items in Kit

• 2 L44649 Inner and Outer Bearings (1.063" ID)
• 2 L44610 Inner and Outer Races(Already Pressed In) 1.98" OD
• 1 10-60 Grease Seal (1.5" x 1.987")
• 1 46749 Grease Cap (1.986" OD)
• 5 X1023R Coned Wheel Nuts
• 1 5 on 4.5" Hub w/6.5" flange
• 1,250lb Capacity Per Hub

 

Dexter Trailer Hubs and Drums - 8-258-5UC1

  • 5 on 4-1/2 Inch
  • For 2000 lbs Axles
  • Hub
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Standard
  • 1/2 Inch Stud
  • L44649
  • L44649
  • Dexter

 

Dexter 8-258-5UC1 Complete Painted Hub Assembly - 5 on 4.5 - L44649 Bearings - 6.5 Inch Hub Flange - Fits BTR 1-1/16 Inch Spindle



To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3. 

 

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Customers Also Bought:
Please enable JavaScript for Full Site Functionality