Dexter K71-651 Electric/Hydraulic Brake Actuator DX1600 For 1600 PSI Disc Brake Application

This Electric/Hydraulic brake actuator provides 1600 psi of pressure for 1-3 axles equipped with disc brakes.  Brake fluid pressure is proportional to the electronic brake controller signal.  Sealed housing provides a weather tight seal.  Two year limited warranty.

Package includes

    (1) E/H1600 Actuator (K71-651-00)
    (1) Instruction Sheet

Dexter Electric/Hydraulic Brake Actuator for Disc Brake Applications 1,600 psi suitable for disc brake applications. Large reservoir capacity Solid state electronics.
 
Requires a 4-wire hookup
Wiring connections:
Yellow: cold side of breakaway switch; the wire that goes hot when a break occurs
Black: positive connection on breakaway switch; the wire that charges the breakaway battery
Blue: output from in-cab controller; the wire that provides power from your brake controller
White: ground Requires a minimum 9 amp/hour breakaway kit

• Dimensions: 11" long x 6" wide x 7" tall
• Compatible with most electronic brake controllers
• Meets or exceeds all Department of Transportation (DOT) regulations and federal braking requirements
•Works with Ford and Dodge factory brake controllers ◦Not compatible with Chevrolet factory brake controllers
• 2 Year limited warranty
• The yellow wire must be attached to the breakaway unit for it to function when a breakaway occurs

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.