Dexter K71-650 Electric/Hydraulic Brake Actuator DX1000 For 1000 PSI Drum Brake Application

Dexter Electric/Hydraulic Brake Actuator for Drum Brake Applications 1,000 psi suitable for drum brake applications. Large reservoir capacity. Solid state electronics.

Requires a 4-wire hookup

Wiring Connections

• Yellow: cold side of breakaway switch; the wire that goes hot when a break occurs
• Black: positive connection on breakaway switch; the wire that charges the breakaway battery
• Blue: output from in-cab controller; the wire that provides power from your brake controller
• White: ground Requires a minimum 9 amp/hour breakaway kit

Product Specifications

• Dimensions: 11" long x 6" wide x 7" tall
• Compatible with most electronic brake controllers
• Meets or exceeds all Department of Transportation (DOT) regulations and federal braking requirements
• Works with Ford and Dodge factory brake controllers ◦Not compatible with Chevrolet factory brake controllers
• 2 Year limited warranty
• The yellow wire must be attached to the breakaway unit for it to function when a breakaway occurs

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.