Trailer Parts Pro H42865BX Boxed Pregreased Hub Assembly - 8 on 6.5 - 14125A/25580 Bearings - Fits 7000 Lbs Axles - 1/2" Studs

This is a ready to install Idler H42865BX Boxed Pregreased Hub Assembly - 8 on 6.5 - 14125A/25580 Bearings - Fits 7,000 Lbs Axles with 1/2" Studs.

Trailer Parts Pro hub kits come with some of your main components like the inner and outer bearings.  With Trailer Parts Pro kits there is no need to worry about the races as they are already pressed into the hub for you.  You will also get the grease seal, grease cap, and wheel nuts for the hub.  This hub is designed for use with a #42 spindle.  Each Hub has a 3,000lb capacity.  Spindle nut and spindle washer sold separately.

 The kit comes with labor-saving Pre-Greased and Pre-Installed Bearings, Races, Seal, as well as Standard and Grease-Lube Dust caps and wheel nuts.

 Reference#: 110399

Product Specifications

• Product Features

  • Application: 5,200-lb - 7,000-lb Dexter axles with #42 spindles
  • Bolt Pattern: 8 on 6-1/2"
  • Includes bearings, races, seal, grease cap, wheel bolts and lug nuts
    • Stud diameter: 1/2"
    • Bearings:
      • Inner bearing: 25580
      • Outer bearing: 14125A
    • Grease seal: 2.25" inner diameter
    • Grease cap: 2.72" outer diameter
  • Capacity: 3,500 lbs per hub

   

  Items in Kit

  • 1x 25580 Inner Bearing (1.75" ID)
  • 1x 14125A Outer Bearing (1.25" ID)
  • 1x 25520 Outer Race (Already Pressed In) 3.265" OD
  • 1x 14276 Inner Race (Already Pressed In) 2.717" OD
  • 1x 10-36 Grease Seal (2.25" x 3.376")
  • 1x 21-39 Grease Cap (2.72" OD)
  • 8x X1023R Coned Wheel Nuts
  • 1x 8 on 6.5" Hub 
  • 3,500lb Capacity Per Hub

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.