Single Axle Hanger Kit - APS6SE - Boxed 1.75/2 Inch Slipper Spring with Hangers and Hardware - 2K through 8K Lbs Axles
Single Axle Hanger Kit - APS6SE - Boxed 1.75/2 Inch Slipper Spring with Hangers and Hardware - 2K through 8K Lbs Axles
Attention Customers:
The items we have listed for pop up campers are the only items we have available. We are not able to special order any items at this time, and we are unable to provide technical assistance due to high order volume. Thank you for your understanding.
Single Axle Hanger Kit - APS6SE - Boxed 1.75/2 Inch Slipper Spring with Hangers and Hardware - 2K through 8K Lbs Axles
Kit includes 3-3/4" tall front hangers, 5-1/6" tall rear hangers and hardware for mounting 2" springs to your 2,000-lb to 8,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.
Product Features
- Attaches 2 leaf springs (sold separately) to your trailer frame
- Use table below to determine hanger location based on type of leaf springs
- Achieves 4-3/4" or 5" clearance between trailer frame and axle, depending on axle size
- Includes:
- (2) 3-3/4" Tall front hangers (721584)
- (2) 5-1/6" Tall rear hangers (721585)
- (4) 3-1/2" Long x 9/16" diameter shackle bolts (91635B)
- (4) 9/16" Diameter locknuts (916DLN)
- Designed for use on trailers with single, 2,000-lb to 8,000-lb axles
- Does not include components for mounting axle to springs
| Leaf Springs |
A - Distance Between Hangers |
B - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
|---|---|---|---|
| 803T3, 1203T3, 1403T3 | 25" | 4-3/4" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
| E5226 | 26" | 5" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
| E5115 | 28" | 5" | 3" (typical 5,200-lb to 7,200-lb trailer axle) |
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
