Dexter 8-232-5UC3 Complete Oil Bath Hub and Drum Assembly - 8 on 6.5 - 25580/25850 Bearings - Fits Dexter 9K Axles
Dexter 8-232-5UC3 Complete Oil Bath Hub and Drum Assembly - 8 on 6.5 - 25580/25850 Bearings - Fits Dexter 9K Axles
Attention Customers:
The items we have listed for pop up campers are the only items we have available. We are not able to special order any items at this time, and we are unable to provide technical assistance due to high order volume. Thank you for your understanding.
Dexter Hub & Drum W/ 8 on 6.5" Bolt Pattern For 9,000lb Dexter Axles Manufactured Before 10-1-1989
Dexter hub & drum kit. With this kit there is no need to worry about the races as they are already pressed into the hub for you. You will also get the oil seal, bearings, oil cap, wheel nuts and retaining ring for the hub. This hub is designed for use with 9K Dexter axles & spindles. Each hub has a capacity if 4,500lbs. The 12-1/4" x 3-3/8" drum & hub comes as a single unit for ease of installation. Spindle nut and washer sold separately.
Items in Kit
• 1x 2585 Inner Bearing (2.25" ID)
• 1x 25580 Outer Bearing (1.75" ID)
• 1x 25520 Outer Race (Already Pressed In) 3.265" OD
• 1x 2520 Inner Race (Already Pressed In) 3.813 OD
• 1x 10-63 Oil Seal (2.875" x 3.376")
• 1x 21-35 Oil Cap
• 1x 46-32 EZ Oil Cap Plug
• 8x 6-109 Coned Wheel Nuts
• 1x 33-52-1 Wheel Retaining Ring
• 1x 8 on 6.5" Hub & Drum
• 4,500lb Capacity Per Hub
To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2” center-to-center diameter.
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
