Orders over $35 qualify for free shipping. Orders under $35 will incur a $5 shipping charge. Excludes Plows, Dump Inserts, Trailers & Salters.
|
snow plow replacement parts
salt spreader accessories
shorelander trailer parts
triton snowmobile trailer parts and accessories

Hub and Drum Only HD42866 - 8 on 6-1/2 - 14125A and 25580 Bearings - 12 Inch x 2 Inch Brake Drums

Brands:
Product Number: RED-HD42866
Vendor Number: HD42866
$186.95 $169.99

Hub and Drum Only HD42866 - 8 on 6-1/2 - 14125A and 25580 Bearings - 12 Inch x 2 Inch Brake Drums

Product Number: RED-HD42866
Vendor Number: HD42866
$186.95 $169.99 You Save $16.96 (9.1%)
Adding this item to your cart will qualify your order for US domestic

QTY:

Hub and Drum Only HD42866 - 8 on 6-1/2 - 14125A and 25580 Bearings - 12 Inch x 2 Inch Brake Drums

Product Specs

  • Hub and Drum ONLY!!!!
  • #42 Spindle
  • 25580 Inner / 14125A Outer Bearings
  • Fits Dexter 5,200 lb. thru 7,000 lb. Axles
  • Capacity of 3,500 lbs. per each
  • For Spindles requiring 2 1/4” or 2 1/8” I.D. Seal
  • Drum Size 12” x 2”
  • 1/2” Studs Standard

 

 

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Customers Also Bought:
Hub and Drum Assembly HD42866UC3 Painted Complete Hub and Drum Assembly - 8 on 6.5 - 25580/14125A Be
REG. $188.95
Sale! - $169.99
You Save $18.96 (10.0%)
Free Shipping
Hub and Drum HD42866UC3-ZL Painted Complete Hub and Drum Assembly - 8 on 6.5 - 25580/14125A Bearings
REG. $198.95
Sale! - $174.99
You Save $23.96 (12.0%)
Free Shipping
Redline HD42866BX Hub and Drum Assembly for 5,200 lb to 7,000 lb Axles - 8 on 6-1/2 - 14125A/25580 Bearings - 12 Inch x 2 Inch Drum
REG. $193.95
Sale! - $179.99
You Save $13.96 (7.2%)
Free Shipping
Please enable JavaScript for Full Site Functionality