Orders over $35 qualify for free shipping. Orders under $35 will incur a $5 shipping charge. Excludes Plows, Dump Inserts, Trailers & Salters.
|
snow plow replacement parts
salt spreader accessories
shorelander trailer parts
triton snowmobile trailer parts and accessories

Hub and Drum Only HD174-5 - 5 Spoke - 15123 and 25580 Bearings - 12 Inch x 2 Inch Drum

Brands:
Product Number: RED-HD174-5
Vendor Number: Redneck HD174-5
$128.95 $99.99

Hub and Drum Only HD174-5 - 5 Spoke - 15123 and 25580 Bearings - 12 Inch x 2 Inch Drum

Product Number: RED-HD174-5
Vendor Number: Redneck HD174-5
$128.95 $99.99 You Save $28.96 (22.5%)
Adding this item to your cart will qualify your order for US domestic

Out of Stock

Hub and Drum Only - HD174-5 - 5 Spoke - 15123 and 25580 Bearings - 12 Inch x 2 Inch Drum

 

Product Specs

  • Trailer Hub and Drum only
  • 5580 Inner / 15123 Outer Bearings
  • Fits Dexter 6,000 lb. and 7,000 lb. Axles
  • Capacity of 3,500 lbs. per each
  • Drum Size: 12” x 2”
  • For spindles requiring 2 1/8” or 2 1/4” I.D. Seals

 

 

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Please enable JavaScript for Full Site Functionality