Orders over $35 qualify for free shipping. Orders under $35 will incur a $5 shipping charge. Excludes Plows, Dump Inserts, Trailers & Salters.
|
DumperDogg
DumperDogg
snow plow replacement parts
salt spreader accessories
caliber trailer ramp glide parts
shorelander trailer parts
triton snowmobile trailer parts and accessories

Tear Mender Instant Fabric and Leather Adhesive - 2 Oz Bottle

Brands:
Product Number: VAL-A Tear Mender
Vendor Number: TG-2
$11.95 $9.99

Tear Mender Instant Fabric and Leather Adhesive - 2 Oz Bottle

Product Number: VAL-A Tear Mender
Vendor Number: TG-2
$11.95 $9.99 You Save $1.96 (16.4%)
Add $35.00 worth of items to your cart to qualify for

Out of Stock

Tear Mender is perfect for repairing the soft top vinyl on pop up campers. Tear Mender will not break in sunlight and and it stays pliable regardless of the outside temperatures.

 

Tear Mender is ideally suited for durable, long lasting and permanent bonds or repairs to items used both indoor and out. Tear Mender is water-proof, flexible, permanent, quick-drying, UV resistant, eco-friendly, non-toxic and acid-free.

 

GENERAL USE DIRECTIONS

For best results do not apply Tear Mender directly to your fabric. Instead pour out a small portion onto any hard surface. Using your finger tip dip it into the glue and carefully spread on a thin coat, press and let dry. You may also use an applicator– such as a toothpick, Popsicle stick or makeup brush. Tear Mender contains natural latex and may cause an allergic reaction. NOTE: when mending fine fabrics, sheer fabrics and black fabrics, always do a test to check for discoloration. Tear Mender dries to a beige color so be sure to apply with care.


• Contains natural latex–test for allergies
• Non-toxic all natural and safe for kids
• Dries in 3 minutes (heavy material may take longer)
• Permanent and flexible
• Machine washable and dry cleanable
• Best if used at room temperature
• Will not harm hard surfaces
• Will not stick to hard surfaces, glue balls up when rubbed for easy removal
• Will not harm skin

 

APPLYING A PATCH

When mending a hole a patch will work well. Cut a piece of fabric larger than the hole, lay it on the underside of your garment and trace around the outer edge. Apply Tear Mender to the inside of that area as well as the back of the patch. Place the patch over the hole and press firmly, let dry. (Tear Mender is made from all natural materials, will not stick to any hard surface, to remove simply rub with your finger until glue balls up–do not wipe up with a cloth as Tear Mender will permanently stick to fabric)

 

RECREATIONAL VEHICLES, CAMPERS, MOTOR HOMES & CYCLES

Soft Top Vinyl – An easy repair that is permanent. Follow the directions for applying a patch shown above. Tear Mender will not break in sunlight and stays pliable regardless of the outside temperatures – uniquely suited for this use. Refer to the General Directions shown above to make the utility repair. Added hint…when patch is bonded to under-side place a small amount of Tear Mender in the tear or puncture on the surface side. This will ensure a waterproof seal.

 

BOAT COVERS & TOPS, SNOW MOBILE COVERS & SEATS

Most of these covers are made of Acrylic Fiber materials. These items are durable and fade resistant. Because Tear Mender adheres to fibers, is UV resistant and remains pliable in hot and freezing temperatures, it is the unique repair “tool” for their repairs. Follow the General Use Directions above. NOTE: The patch material should be a heavy cotton or similar porous fiber as the cover. Allow 30 minutes drying time. Seats for boats and snowmobiles: Cut a patch and bond to the underside of the hole by pushing the patch into the hole then using your fingers to smooth it out. Using the applicator tip apply a small amount of glue between the patch and area around the inside of the hole. Press and hold until bond begins to sure in about 3 minutes.

 

NYLON & SMOOTH SYNTHETIC FABRICS

Tear Mender will NOT bond nylon or similar fabric to itself…but the “Sandwich Method” works well. This type of repair can extend the life of these items when no other mending can. Sandwich Method: Cut 2 patches of heavy cotton (or similar fabric) a little bit bigger than the hole you are mending. Place them over the hole on both sides and trace them with a pencil. Apply Tear Mender to one patch first, then around the hole (staying inside of your traced line). Press firmly and let dry, wiping off excess as you go. Turn over and repeat on the second side, creating a sandwich effect.

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Customers Also Bought:
Please enable JavaScript for Full Site Functionality