UFP 34557 Model A-60 Brake Actuator Side Lockout Bracket
UFP 34557 Model A-60 Brake Actuator Side Lockout Bracket
Attention Customers:
The items we have listed for pop up campers are the only items we have available. We are not able to special order any items at this time, and we are unable to provide technical assistance due to high order volume. Thank you for your understanding.
This simple lockout bracket is included on some actuator models to stop the coupler from moving or surging back when you back the trailer. The brake lockout bracket is used when you need to backover soft ground or up a hill. Also consider the UFP Brake Lockout upgrade 34359 for ease of use.
Directions for use:
- Put or place the brake lockout into slot behind roller pin on the side of the actuator.
- Slide the brake lockout completely forward in slot. Washer will keep brake lockout from falling out while backing up.
When you pull the trailer forward and the actuator extends, the brake lockout should fall
out of the slot. This makes sure the actuator will function when stopping.
NOTE: THE BRAKE LOCKOUT BRACKET MUST BE REMOVED BEFORE TOWING OR THE TRAILER BRAKES WILL NOT WORK.
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
