Dexter 8-218-9 Hub and Drum Only - 8 on 6.5 - 25580/02475 Bearings - Fits Dexter 8000 Lbs Axles - 12.25 x 3-3/8 Inch Drums
Dexter 8-218-9 Hub and Drum Only - 8 on 6.5 - 25580/02475 Bearings - Fits Dexter 8000 Lbs Axles - 12.25 x 3-3/8 Inch Drums
Attention Customers:
The items we have listed for pop up campers are the only items we have available. We are not able to special order any items at this time, and we are unable to provide technical assistance due to high order volume. Thank you for your understanding.
Dexter 12-1/4" x 3-3/8" Oil Hub & Drum W/ 8 on 6.5" Bolt Pattern 8,000lb Axles
This hub is designed for use with a #42 spindle. Each hub & drum has a capacity of 4,000lbs. Dexter hub & drum only. There is no need to worry about the races as they are already pressed into the hub for you. The bearings, oil seal, oil cap, and wheel nuts for the hub are sold separately. Spindle nut and spindle washer sold separately.
Product Features
- Application: 8,000-lb Dexter axles
- Works with both electric and hydraulic brakes
- Drum dimensions: 12-1/4" diameter x 3-3/8" wide
- Bolt pattern: 8 on 6-1/2"
- Pilot hole diameter: 4.56"
- Old style - compared to the 4.75" new style
- Includes races and wheel bolts
- Requires bearings, seal and grease cap (sold separately)
- Bearings:
- Inner bearing: 25580
- Outer bearing: 02475
- Bearings:
- Capacity: 4,000 lbs per hub
Items Included
- 1x 25520 Inner Race (Already Pressed In) 3.265" OD
- 1x 02420 Outer Race (Already Pressed In) 2.688" OD
- 1x 8 on 6.5" Hub & Drum
Items Sold Separately
- 1x 25580 Inner Bearing (1.75" ID)
- 1x 02475 Outer Bearing (1.25" ID)
- 1x 10-63 Oil Seal (2.25" x 3.376")
- 1x RG04-230 Oil Cap
- 8x 6-53 Coned 9/16" Wheel Nuts
To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2” center-to-center diameter.
008-218-09 Trailer Hub and Drum - Oil
Replaces 8-218-9
This item is presently on backorder
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
