Buyers HM074P Char-Lynn Hydraulic Direct Drive Auger Motor (4 Bolt 17.9 CIPR) - Replaces 101-1007, 462L, 60295, 62452, 04101-042-00

Char-Lynn H Series motors are economical, efficient, small, compact, and powerful. They are designed for medium duty applications. These motors have the industry proven spool valve design combined with state-of-the-art gerotors. In addition, their wide variety of mounting flanges with a 1" diameter straight shaft, woodruff keyway, and 1/2" NPT port proivde great design flexibility. Direction of the shaft rotation and shaft speed can be controlled easily and smoothly throughout the speed range of the motor and the equipment can be driven directly eliminating many costly mechanical components.

Product Features and Specs

• Compares To 101-1007-009
• Flow (Continuous) 15 GPM
• Input Mount Type 4 Bolt
• Material Cast Iron
• Maximum Case Pressure (Without Case Drain) 1500 PSI
• Maximum Speed (Continuous) 192 RPM
• Pilot Diameter 1.75 "
• Shaft Keyway 0.25 "
• Shaft Type Straight
• Displacement 17.9 in.²
• Flow (Intermittent) 20 GPM
• Torque Rating (Continuous) 3110 Inch Pound
• Torque Rating (Intermittent) 3430 Inch Pound
• Port Size 1/2 NPT
• Shaft Size 1.00 "
• Maximum Speed at Continuous Flow 192 RPM
• Maximum Speed at Intermittent Flow 256 RPM
• Minimum Starting Torque (Continuous Pressure) 2500 Inch Pound
• Minimum Starting Torque (Intermittent Pressure) 3430 Inch Pound
• Pressure Δ Bar (Continuous) 1350 PSI
• Pressure Δ Bar (Intermittent) 1800 PSI

Cross over list (part numbers that this part replaces):

• CHAR-LYNN 101-1007
• FLINK 462L
• MEYER 60295
• MEYER 62452
• SWENSON 04101-042-00

 

Prop. 65 Warning for California Residents

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.